How to Launch the Lovec Loader - Guide

This guide brings together the launch process for all Lovec developer software from the ForgeCheats catalog in one place: LOVEC ESP and LOVEC FULL for PUBG, LOVEC FULL and LOVEC LITE for Rust, LOVEC LITE and LOVEC PRO for Russian Fishing 4, LOVEC WEB RADAR for Arena Breakout Infinite, LOVEC WEB RADAR for DayZ, and LOVEC RADAR for Escape From Tarkov. Lovec products use three different launch mechanisms, so the article is split into sections - find your software in the table of contents and jump straight to the step you need.

The download link for your specific product's loader arrives in your ForgeCheats account right after payment - it is not in this article and cannot be, access only goes through the buyer's account.

Table of Contents

• Section A - USB Flash Drive and In-Game Injection (LOVEC ESP/FULL for PUBG, LOVEC FULL/LITE for Rust)
• Section B - Loader Account Dashboard (LOVEC LITE/PRO for Russian Fishing 4)
• Section C - Web Radar (LOVEC WEB RADAR for Arena Breakout Infinite)
• Section C2 - Web Radar (LOVEC WEB RADAR for DayZ)
• Section D - Radar for Escape From Tarkov (LOVEC RADAR)
• Frequently Asked Questions

Section A. USB Flash Drive and In-Game Injection

This section is for LOVEC ESP and LOVEC FULL (PUBG), as well as LOVEC FULL and LOVEC LITE (Rust). All four products use the same principle: the loader runs strictly from a flash drive and is removed from the PC before entering the game, and the software menu opens right in-game with the Insert key.

Step 1. Prepare Your System

The loader will not start without a couple of Microsoft system components: install Visual C++ Redistributable 2015-2022 x64 (download) and Microsoft .NET Framework 4.8 (download). While you are at it, update DirectX to the latest version (download) - without it, ESP visuals can disappear.

Next, disable Windows Defender and any third-party antivirus - a detailed step-by-step guide with screenshots is already available in our article How to Disable Windows Protection and Antivirus to Run a Cheat, so there is no point repeating it here. A quick option is the DControl (Defender Control) utility, which turns off Defender in one click: download dcontrol.rar.

Step 2. Close Conflicting Anti-Cheats

For PUBG (LOVEC ESP / LOVEC FULL), fully unload before launching:

• BattlEye
• VAC
• EasyAntiCheat (EAC)
• XignCode

For Rust (LOVEC FULL / LOVEC LITE) it is a different story: through Control Panel → Programs and Features, fully uninstall Faceit AC and Riot Vanguard. Their drivers conflict with the software at the kernel level, simply closing the process is not enough, you need to actually uninstall them.

Rust: LOVEC FULL draws the menu and ESP through the Discord game overlay. In Discord (Settings → Game Overlay) enable "Enable in-game overlay", disable "Use legacy overlay" and enable "Hardware Acceleration" - without this the menu and visuals will not appear. The game must be in "Borderless" or "Windowed" mode, exclusive fullscreen mode is not supported by the overlay.

Step 3. Launch the Loader from the Flash Drive

1. Download the loader using the link from your account and copy the file onto a USB flash drive.
2. Delete any copies of the loader from the PC's drive - a leftover copy by itself raises the risk of a ban.
3. Run the loader from the flash drive as administrator (close the game itself and Steam/the client before launching).
4. Enter the activation key that was sent to your email after payment.
5. Wait for the Done (PUBG) or injected (Rust) message - the loader will close on its own.
6. Be sure to remove the flash drive from the PC before entering the game - this is the main protection against a ban at the start.
7. Launch the game. 30-60 seconds after it fully loads, press Insert (alternative - Delete), the menu will open after a short beep.

Section B. Loader Account Dashboard (Russian Fishing 4)

LOVEC LITE and LOVEC PRO for Russian Fishing 4 work differently - there is no flash drive here, but instead there is a personal profile inside the loader itself with a login and password that you create yourself on first launch.

Step 1. Downloading and Unpacking

Download the loader archive using the link from your ForgeCheats account and unpack it into any folder on your drive (for example C:\Lovec). The archive password is listed right in your account next to the link.

Step 2. Registration and Key Activation

1. Run the installer file as administrator (right-click → "Run as administrator").
2. On first launch, come up with a login and password for your loader profile - be sure to remember them, support cannot always restore a forgotten password quickly.
3. Enter the license key you received after purchase into the corresponding field.
4. Click the registration or activation button and wait for confirmation.

Step 3. Logging In and Launching the Software

1. Log into the loader with your login and password - a window with your available subscriptions will open.
2. Launch Russian Fishing 4 itself (Steam or the standalone launcher).
3. With the game running, go back to the loader and click the rf4_public card.
4. Wait for the successful injection message.
5. Open the software menu in-game with the Insert key (if your keyboard does not have this key, bring up the on-screen keyboard via Win + R → osk → Enter, and press Insert on it).

Default hotkeys: Insert/Delete - open or close the menu, F - toggle unbreakable tackle on/off. All bindings can be changed in the software's own settings.

Section C. LOVEC WEB RADAR Web Radar (Arena Breakout Infinite)

LOVEC WEB RADAR is built differently from all other Lovec products: a small collector program on your PC reads the raid data, while the map itself with players and loot opens in a browser - on the same computer, on a phone, or on a second monitor.

Preparation

Disable Windows Defender and any third-party antivirus the same way as described in Section A above (see the general Windows guide), and additionally disable "Core Isolation" → "Memory Integrity" and "Reputation-based protection" in Windows security settings. If you do not do this, the collector will not be able to read the game's data.

After a reboot, Windows sometimes turns protection back on by itself. If the collector stops seeing the game after a restart, go into the security settings and disable memory integrity again, or add the collector's folder to your antivirus exclusions.

Launch

1. Download the collector using the link from your account - make sure to do this only after antivirus and Defender are already disabled, otherwise the file may get deleted during download.
2. Run the collector as administrator and enter the activation key from the email you received after payment.
3. Wait for a status like Connected or Waiting for game in the collector window - do not close it, it will minimize itself and open the radar link in your browser on its own.
4. Enter a raid as usual, pick a map and mode, and wait for the location to load. On the loading screen and in the lobby the browser map will be empty - that is normal, players and loot will appear as soon as you are actually in the raid.
5. Keep the radar tab open for the whole raid.

Tip: open the radar link on your phone or a second monitor instead of over the game window - that way the map will not end up in your stream capture and stays within reach. For the next raid there is nothing to restart, the map updates on its own.

Section C2. LOVEC WEB RADAR Web Radar (DayZ)

The DayZ version of LOVEC WEB RADAR runs on a loader the developer calls Tundra. It sits on the gaming PC, collects what is around your survivor and sends it to a private radar page. There is no menu inside DayZ: the map opens in a browser on the same PC, a second monitor, a tablet or a phone. Nothing is drawn over the game, so any window mode works and no flash drive is needed.

What You Need

• Windows 10 or 11, any build except 26H1 and 26H2, on an Intel or AMD processor
• DayZ from Steam
• Administrator rights for the loader
• Optional: phone, tablet or second monitor for the map

Prepare Windows First

Turn off Windows Defender completely (DControl from Section A is the fastest way), then in Windows Security disable "Core Isolation" → "Memory Integrity" and "Reputation-based protection". Uninstall third-party antivirus (Kaspersky, Avast, 360, ESET, McAfee), pausing is not enough. Screenshots for every step are in our guide on disabling Windows protection. Download Tundra only after all of this, into its own folder, and if you want an exclusion, add just that folder.

Launch Step by Step

1. Grab the Tundra loader from your account.
2. Right-click the loader, choose Run as administrator and enter your key. If typing does not work, copy the key and paste it with Ctrl+V.
3. Wait until the status reads Connected or Waiting for game. The loader window then closes on its own and the radar link opens in your browser. This is normal.
4. Start DayZ through Steam and join a server. The radar picks Chernarus+, Livonia, Sakhal or Namalsk automatically. In the main menu, the queue and on the loading screen the map stays empty; markers appear once your character is actually on the server.
5. Keep the radar tab open all session.

Phone, Tablet or Second Monitor

Copy the address from the radar tab and open it in the browser on your phone or tablet; the layout adapts to touch. For a second monitor, just drag the browser window over. Hotkeys only react while the radar tab is focused, not the DayZ window: F1 opens settings, F2 shows the player list, F makes the camera follow a selected player, and the view switch flips 2D and 3D (beta).

Common DayZ Radar Problems

• The loader vanished after download. Defender or an antivirus removed it. Redo the Windows preparation and download again.
• The map is empty while you are in game. Press F5 in the radar tab. If that does not help, close DayZ, run the loader as administrator again, wait for Waiting for game and only then start the game.
• Wrong map after switching servers. Refresh the tab with F5.
• Cannot find your key. Check My Purchases in your account or message support with your order number.

Play It Safe

DayZ servers run BattlEye and no cheat can promise you will never be banned. Do not use the radar on an account you value, do not react to enemies you could not possibly see, and never show the radar tab on a stream or recording because viewers will spot it. Check the product page status before each session and skip it while the radar is being updated.

Section D. Radar for Escape From Tarkov (LOVEC RADAR)

For LOVEC RADAR (Escape From Tarkov) the developer has a separate detailed guide with its own screenshots - there is no need to duplicate it here specifically for this product, the current version is always in your account next to the collector link. The general principle matches Section C: a collector run from a USB flash drive gathers raid data, the map opens in a browser and updates in real time, and the session can be handed off to another viewer with a separate link.

Frequently Asked Questions

The Loader or Collector Will Not Start, Closes Right Away

This is almost always an antivirus that was not closed or Windows Defender that was not disabled. Go through the system preparation step again: disable Defender using DControl, install Visual C++ and DirectX, and only then download the file again.

No Menu Appears In-Game After Insert or Delete

Make sure the loader showed Done or injected, the flash drive is removed (for Section A), and for Rust - that the Discord overlay is active and the game is in windowed mode. Try the other key (Insert instead of Delete or the other way around) and wait up to a minute after the game has fully loaded.

"Synchronise time" After Entering the Key

Open Win + I → Time & Language → and sync your clock with the time server. Even a couple of minutes of desync breaks the key check.

"Connection error" When Activating the Key

Run the loader again with a VPN turned on - this is usually an issue on the internet provider's side, not the software itself.

"Bad HWID" on Activation

The key is already bound to different hardware or the binding has expired - contact ForgeCheats support to reset the binding, this cannot be resolved on your own.

The Software Stopped Working After a Game Update

Wait for the software itself to update - for games with an active anti-cheat (PUBG, Rust, Arena Breakout Infinite, DayZ, Escape From Tarkov) this usually takes anywhere from a few hours to a full day after a patch, subscription time is compensated in these cases. For Russian Fishing 4, updates come out even faster, since there is no kernel-level anti-cheat here that the software has to be re-adapted to after every patch.

We post the update status after every patch in Telegram (300+ members) and Discord (2000+ members) - you can also ask other Lovec software buyers there if something is not working according to this guide.